
DGQA Technician Recruitment 2026 – Apply Offline for 14 Posts
The DGQA Technician Recruitment 2026 notification has been released by the Directorate General of Quality Assurance (DGQA), Department of Defence Production, Ministry of Defence. The recruitment covers 14 Group ‘C’ Industrial vacancies, comprising 7 Technician (Skilled) and 7 Technician (Semi Skilled) posts.
Unlike many current government recruitments, DGQA has not provided an online application portal for these posts. Eligible candidates must prepare the prescribed physical application and send it by Registered Post or Speed Post to the Controllerate of Quality Assurance (Systems), Secunderabad.
DGQA Technician Recruitment 2026 Overview
| Particular | Details |
|---|---|
| Recruiting Organisation | Directorate General of Quality Assurance (DGQA) |
| Department | Department of Defence Production, Ministry of Defence |
| Post | Technician (Skilled) / Technician (Semi Skilled) |
| Post Category | Group ‘C’, Non-Ministerial, Industrial |
| Total Vacancies | 14 |
| Technician (Skilled) | 07 |
| Technician (Semi Skilled) | 07 |
| Recruitment Type | Direct Recruitment |
| Application Mode | Offline |
| Application Method | Registered Post / Speed Post |
| Age Limit | 18–27 years |
| Probation | 2 years |
| Initial Posting Locations | Secunderabad, Bengaluru, Jabalpur and Chandigarh |
| Application Address | Controllerate of Quality Assurance (Systems), DGQA Technical Complex, Manovikas Nagar P.O., Secunderabad – 500009 |
The recruitment is advertised under Advertisement No. CQA(S)/2026/Tech(SS) & Tech(SK) in the Employment News issue dated 8–14 August 2026. Selected candidates are liable to serve anywhere in India, including field or remote locations, according to organisational requirements.
DGQA Technician Vacancy 2026
The 14 posts are distributed across six establishment codes and four posting locations.
| Post / Establishment | Location | Vacancies | Category |
|---|---|---|---|
| Technician (Skilled) – SC-009 | Secunderabad | 4 | UR-3, OBC-1 |
| Technician (Semi Skilled) – BLR-006 | Bengaluru | 3 | UR-1, OBC-1, ST-1 |
| Technician (Semi Skilled) – BLR-046 | Bengaluru | 1 | UR-1 |
| Technician (Skilled) – BLR-046 | Bengaluru | 2 | UR-2 |
| Technician (Semi Skilled) – JBP-011 | Jabalpur | 1 | UR-1 |
| Technician (Semi Skilled) – CHD-002 | Chandigarh | 2 | UR-1, OBC-1 |
| Technician (Skilled) – SC-009/1 | Secunderabad | 1 | UR-1 |
The establishment codes identify different DGQA Controllerates and Quality Assurance establishments. This makes the vacancy distribution important because candidates are not applying against a single generic technician pool.
DGQA Technician Eligibility and Qualification
The educational and technical requirements differ between the two posts.
| Post | Required Qualification |
|---|---|
| Technician (Skilled) | Matriculation or equivalent + ITI Pass Certificate in the specified trade or approved equivalent Defence Services Tradesman Course + 1 year experience in the specified trade |
| Technician (Semi Skilled) | ITI pass in any Trade or approved equivalent Defence Services Tradesman Course |
Only Indian Nationals can apply. Candidates holding additional qualifications, or pursuing another qualification by the application closing date, must mention the details in the application.
For the Skilled post, the ITI qualification alone is not enough because the notification also requires one year of experience in the specified trade. Semi Skilled applicants have a broader ITI eligibility route because the notification accepts an ITI pass in any trade.
DGQA Technician Age Limit 2026
Candidates must be 18 to 27 years of age as on the application closing date. The date of birth must be supported by the 10th/Matriculation certificate or a Birth Certificate issued by a competent authority; Aadhaar is not accepted as proof of date of birth.
| Category | Upper-Age Relaxation |
|---|---|
| SC/ST | 5 years, for reserved SC/ST vacancies |
| OBC | 3 years, for reserved OBC vacancies |
| Ex-Servicemen (General/UR) | 3 years after deduction of military service |
| Ex-Servicemen (OBC) | 6 years after deduction of military service |
| Ex-Servicemen (SC/ST) | 8 years after deduction of military service |
| Departmental Candidates | Up to 40 years for UR, 43 years for OBC and 45 years for SC/ST |
The notification requires supporting certificates for candidates claiming reservation or age relaxation.
DGQA Technician Salary 2026
The two posts carry different Pay Matrix levels under the 7th CPC.
| Post | Pay Level | Pay Matrix |
|---|---|---|
| Technician (Semi Skilled) | Level-1 | ₹18,000–56,900 |
| Technician (Skilled) | Level-2 | ₹19,900–63,200 |
The notification also states that selected employees are entitled to applicable Government of India allowances and facilities, including Dearness Allowance, House Rent Allowance, Transport Allowance, Children Education Allowance, Leave Travel Concession and medical facilities. Candidates will be covered under NPS/UPS as applicable.
DGQA Technician Recruitment 2026 Important Dates
The notification uses the Employment News publication date rather than giving a fixed calendar closing date.
| Event | Schedule |
|---|---|
| Employment News Issue | 8–14 August 2026 |
| General Candidates | 21 days from publication of the advertisement |
| Specified Remote/Northeastern/Island Areas | 28 days from publication |
| Written Test / Trade Test | Date and venue to be communicated through Admit Card |
The specified extended period applies to candidates from Assam, Meghalaya, Arunachal Pradesh, Mizoram, Manipur, Nagaland, Tripura, Sikkim, Ladakh Division of J&K, Lahaul & Spiti and Pangi Sub-Division of Chamba District in Himachal Pradesh, Andaman & Nicobar Islands and Lakshadweep.
DGQA Technician Application Fee
The notification does not mention a separate application fee. However, every applicant must enclose a self-addressed envelope measuring 30 cm × 12 cm with a ₹55 postal stamp for dispatch of the admit card.
This ₹55 stamp requirement is part of the physical application procedure and should not be treated as a separate online examination fee.
DGQA Technician Selection Process 2026
DGQA will select candidates through a Written Test followed by a Trade Test. There is no interview for these Technician posts.
Written Test
The written examination contains 100 objective-type questions for 100 marks and has a duration of 90 minutes. There is no negative marking for wrong answers.
| Subject | Questions | Marks |
|---|---|---|
| General Intelligence and Reasoning | 25 | 25 |
| General Awareness | 25 | 25 |
| English Language and Comprehension | 25 | 25 |
| Numerical Aptitude | 25 | 25 |
| Total | 100 | 100 |
Parts covering General Intelligence and Reasoning, General Awareness and Numerical Aptitude are set in English and Hindi. The English Language and Comprehension section is in English only.
Trade Test
Candidates shortlisted from the written examination move to the Trade Test according to the applicable category and establishment. The Trade Test carries 100 marks, with 40 marks as the minimum qualifying mark.
Final merit is prepared after both stages based on the relevant Trade and Establishment. In a tie, the notification gives priority to the older candidate, followed by higher marks in Numerical Aptitude, Reasoning and General Awareness.
Preparation Tips for DGQA Technician Recruitment 2026
The best preparation strategy depends on which Technician post you are targeting. Skilled applicants should give particular attention to their specified ITI trade, because the recruitment requires both relevant trade experience and a subsequent Trade Test. Semi Skilled candidates have eligibility through ITI in any trade, but they should still be ready to demonstrate practical trade competence during the selection stage.
For the written test, divide preparation evenly among Reasoning, General Awareness, English Language and Numerical Aptitude because each section contains 25 questions. Since there is no negative marking, candidates can attempt all questions, while still managing the 90-minute time limit carefully.
Trade preparation should not be treated as an afterthought. The Trade Test carries the same maximum marks as the written examination, so candidates should revise practical procedures, tools, safety practices and core techniques relevant to the trade for which they are applying.
Applicants should also pay attention to the Establishment attached to their vacancy. The final merit is prepared post both tests based on Trade and Establishment, while vacancies are spread across specific DGQA establishments in Secunderabad, Bengaluru, Jabalpur and Chandigarh.
How to Apply for DGQA Technician Recruitment 2026
DGQA has specifically prescribed an offline application process. There is no online form to submit.
- Download and use the prescribed application format in Appendix ‘A’.
- Type the application in English on A4-size paper.
- Complete the appropriate Admit Card format: Appendix ‘B’ for Semi Skilled or Appendix ‘C’ for Skilled.
- Submit the Admit Card in duplicate.
- Affix one self-attested passport-size photograph on the application and one on each Admit Card copy.
- Enclose the required self-addressed envelope measuring 30 cm × 12 cm with a ₹55 postal stamp.
- Superscribe the envelope with the post and category for which you are applying.
- Government and PSU employees must route the application through proper channel and attach the required NOC.
- Send the complete application by Registered Post or Speed Post to the prescribed Secunderabad address.
Postal Address:
Controllerate of Quality Assurance (Systems),
DGQA Technical Complex,
Manovikas Nagar P.O.,
Secunderabad – 500009.
Do not delay the application: The department will reject applications that arrive after the closing date, even when postal delays cause the late delivery.
Documents Required for DGQA Technician Application
Candidates applying through the physical-post route should check the envelope carefully before dispatching the application.
- Completed and signed Appendix ‘A’ application form.
- Appendix ‘B’ or Appendix ‘C’ Admit Card in duplicate.
- Self-attested educational, technical qualification and experience certificates.
- Self-attested Date of Birth certificate.
- Self-attested caste certificate, where applicable.
- Self-attested Aadhaar Card.
- Three recent passport-size photographs.
- Self-addressed 30 cm × 12 cm envelope carrying a ₹55 postal stamp.
- NOC from the Head of Office for eligible Government Service or PSU employees.
The notification requires serving Government/PSU employees to submit an NOC from their Head of Office. The department will reject applications that do not include the required NOC.
Common Mistakes to Avoid in DGQA Technician Recruitment 2026
- Do not search for an online application link: DGQA requires a physical application by Registered or Speed Post.
- Do not use Aadhaar as DOB proof: The notification specifically does not accept Aadhaar for establishing date of birth.
- Do not forget the second Admit Card copy: Candidates must submit the prescribed Admit Card in duplicate along with the application.
- Do not omit the ₹55 stamped envelope: Candidates must enclose a self-addressed envelope measuring 30 cm × 12 cm with a ₹55 postal stamp for admit card dispatch.
- Do not forget the NOC: Candidates currently working for the Government or a PSU must obtain the required NOC from their Head of Office and include it with the application. The department will reject applications that do not include the required NOC.
- Do not post the application close to the deadline: Postal delay does not protect an application received after the closing date.
Important Links for DGQA Technician Recruitment 2026
| Resource | Link |
|---|---|
| DGQA Technician Notification PDF | Employment News notification |
| Official Website | Department of Defence Production |
The source provides the Employment News notification PDF and the Department of Defence Production website as the official links.
Frequently Asked Questions About DGQA Technician Recruitment 2026
What is DGQA Technician Recruitment 2026?
It is a Direct Recruitment drive by the Directorate General of Quality Assurance for 14 Group ‘C’ Industrial Technician posts, comprising 7 Skilled and 7 Semi Skilled vacancies.
How many vacancies are available in DGQA Technician Recruitment 2026?
There are 14 vacancies in total. The recruitment includes 7 Technician (Skilled) posts and 7 Technician (Semi Skilled) posts.
What is the Eligibility for DGQA Technician Posts?
Technician (Skilled) requires Matriculation, an ITI certificate in the specified trade or an approved equivalent Defence Services Tradesman Course, and one year of relevant experience. Technician (Semi Skilled) requires an ITI pass in any trade or an approved equivalent course.
What is the age limit for DGQA Technician Recruitment 2026?
Candidates must be 18 to 27 years old as on the application closing date, subject to the applicable age relaxations.
Is there an online application for DGQA Technician Recruitment 2026?
No. Candidates must submit the prescribed physical application by Registered Post or Speed Post.
Is there an application fee?
No separate application fee is mentioned. However, applicants must send a self-addressed envelope with a ₹55 postal stamp for admit card dispatch.
Is there an interview in DGQA Technician Recruitment 2026?
No. Selection consists of a Written Test followed by a Trade Test.
What is the salary of a DGQA Technician?
Conclusion
The DGQA Technician Recruitment 2026 is particularly relevant for ITI-qualified candidates seeking Group ‘C’ Industrial positions under the Ministry of Defence. The recruitment combines a 100-mark objective Written Test with a 100-mark Trade Test and does not include an interview.
Candidates should pay close attention to the physical application requirements, especially the prescribed appendices, duplicate Admit Card, three photographs, ₹55 stamped envelope and Registered/Speed Post submission. The notification also makes the establishment and trade important, so applicants should verify the exact vacancy they are applying for before dispatching the application.